GT System USB To UART Bridge (COM4) Driver Download

Posted : admin | On 30-03-2021

USB-RS232 Serial Converter Driver Download

  1. GT System USB To UART Bridge (COM4) Driver Download
  2. Gt System Usb To Uart Bridge (com4) Driver Download Windows 7

Windows 7 64-bit & 32-bit, Windows Vista 64-bit & 32-bit, Windows XP, Windows 2000, Windows Me, Windows 98

Important note regarding Windows 7 and Vista:
The driver MUST be installed 'as Administrator'
Right-click the downloaded EXE file and choose Run as administrator

Download the Windows installer for the USB RS-232 adaptor:
Download for Windows 7/Vista/XP (32-bit)
Download for Windows 7/Vista (32-bit and 64-bit)

1) Download the USB driver at 3) The line shows CP2101 USB to UART Bridge.The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with.HE USB-Comport Bridge: Drivers List. 1 drivers are found for ‘HE USB-Comport Bridge’. Cp2104 usb to uart bridge controller dowload (ver. 2.1.9, 13 May 2012) Cp2104 usb to uart bridge controller driver (ver. 1.4.3, 15 March 2013) Cp2104 usb to uart bridge controller hp driver (ver. Adaptec serial ata hostraid driver driver download for windows 10. 1.2.6, 12 August 2011) Cp2104 usb to uart bridge controller hp mini 210 (ver. 2.4.4, 24 June 2013). To download the mobile demo app from the Google Play store, please click on or scan this QRCode. UC2322/UC2324 2/4-Port USB-to-Serial Hub available now! NOTICE If you are updating a Windows operating system to 8 or later, please refer to the UC232A FAQ to ensure compatibility.

With this approach, you are not required to distribute INF files for your device because the system uses Usbser.inf. If your device specifies class code 02 but a subclass code value other than 02, Usbser.sys does not load automatically. Pnp Manager tries to find a driver. If a suitable driver is not found, the device might not have a driver loaded.

If for some reason the above driver does not work, try one of the following:
Download for Windows 7/Vista/XP (32-bit and 64-bit - Alternate driver)
Download for Windows XP, 2000, 98/ME (32-bit only)

Driver

For older cables (purchased prior to October, 2010):
Download for Windows 7/Vista/XP (32-bit and 64-bit)
Download for Windows Vista (32-bit only)

Run the installer, then after rebooting, plug the USB end of the adapter into one of the USB ports on the computer.

NOTE: For Windows 7, please use RC build 7100 or RTM Final version. (Installer program will not run on early Windows 7 or Beta versions)

Check the software driver installation

1) Open the Device Manager dialog from Control Panel

GT System USB To UART Bridge (COM4) Driver Download

  • Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
  • Windows XP: Start >> Control Panel >> System >> Hardware >> Device Manager
  • Windows 2000: Start >> Settings >> Control Panel >> System >> Hardware >> Device Manager
  • Windows 98/ME: Start >> Settings >> Control Panel >> System >> Device Manager

2) Click the plus sign (+) next to 'Ports'.

3) If the device is properly installed, 'Serialio.com USB Serial Port' or 'Prolific USB-to-Serial COM Port' will be displayed.


USB

The software driver is properly installed, but the USB-RS232 adaptor does not work as expected

Gt System Usb To Uart Bridge (com4) Driver Download Windows 7

One of the common reasons that software may not work as expected with a USB-Serial adaptor when the devcie is properly installed, is many older programs (and even some new ones) only support a limited number of COM ports (e.g. only COM1 - COM4)

Uart

If the USB-RS232 adapter is installed as COM5, it may need to be reassigned to COM1 - COM4 to work with some software.

The following outlines how to to reassign the COM port on Windows XP/2K/Me/98SE

Windows XP

1) Follow steps 1-3 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

Lenovo easy camera software, free download for windows 10. Version HistoryVersionPopularityRelease NotesPC Matic NotesDownload10.0.81.35%10.0.01.35%10.0.61.35%10.0.22.70%10.0.31.35%6.0.1326.191.35%8.0.1.23796.76%10.0.51.35%6.3.9600.111051.35%3.15.0612.12.70%2.41.50.232.70%3.14.919.14.05%3.14.919.16.76%6.0.1324.72.70%6.0.1323.02.70%.

4) In the 'COM Port Number' drop-down select the desired port number. For example if the software requires COM2, select COM2. Note the COM port must have '(in use)' listed next to it, if it does then another device with that name is already installed in the system. After selecting the desire port number, click 'OK.'

5) Click 'OK' again, and the device will show up as being on the same COM port that it was before (i.e., COM5), but should show up on the selected port name when the Device Manager dialog is closed and opened again.

6) Close the Device Manager. Launch the software to use with the new COM port.

Windows 2000, Me, and 98 SE (Second Edition)

1) Follow steps 1 2 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties.

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) Uncheck 'Use automatic settings'.

5) Select 'Input/Output range'. Elsa airlancer usb-11 driver download. Click on 'Change Settings'.

6) Type '02E8-02EF' in the Value box. This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are.

  • COM 1: 03F8-03FF
  • COM 2: 02F8-02FF
  • COM 3: 03E8-03EF
  • COM 4: 02E8-02EF

7) Enter the value, then click OK. Click OK again, then click Yes when the 'Creating a Forced Configuration' window appears. Click OK.

8) Restart the computer. The Device Manager can be checked, to see the COM port change.

Note: Adaptor may not be exactly as pictured above.
back